Your IrisVision will take approximately 5 hours to fully charge and will automatically return to Focus mode when powered on.
NOTES:
- Please make sure that your headset is powered on and the Display Unit is installed into the headset.
- The headset does not go to sleep in Television mode. Charging while in Television mode is not recommended.
- Plug the wireless charging pad into an electrical outlet.
- Center the IrisVision headset face down on the wireless charging pad. If voice prompts are enabled, you will hear a verbal prompt, and a solid red light will illuminate on the charging pad when the headset is properly placed on the charging pad.
- If you DO NOT hear this tone or see any illumination:
- The headset contains a proximity sensor to determine if it is in use. Please place the straps outside of the headset while it is charging to ensure that the sensor is not activated.
- Remove the Display Unit from the headset and place the back of the Display Unit (not the screen) directly onto the pad instead.
The screen will turn black few minutes after you set the headset on the charger. When the Display Unit is fully charged, the red light on the charging pad changes to green and you will hear a verbal prompt, “Charging completed” (if voice prompts are enabled).
While the headset is charging, the charging pad will emit a solid red light (circled).
When the headset is fully charged, the charging pad will emit a solid green light (circled).
If the red light is not on or if it is flashing, the headset is not charging. Please remove your headset and reposition it until the light remains solid red.
The IrisVision’s battery lasts 3 hours. It can last 3+ hours without continuous use, and all day (8 to 10 hours) on standby. You can make the most of this time by powering the headset off when you are not using it.